UHU Allplast 30g/33ml

Product description
UHU allplast is a transparent, powerful universal adhesive for plastics, multipurpose domestic applications, handicraft work, repairs and model building. The
hard adhesive film remains transparent and is temperature resistant.

Field of application
UHU allplast attains an excellent bond strength on numerous types of plastics
such as polystyrene and high impact polystyrene types (ABS, SAN, SB, ASA), PVC
hard.
Limited application on Plexiglas® (PMMA), Celluloid®, cellulose ester (CN, CAB),
polycarbonate (PC).
Phenolic resins (Bakelite®), melamine resins (Resopal®), glass fibre reinforced
polyester, polyurethane (PUR) and epoxide resins (EP) can be glued as well.
UHU allplast also glues materials such as wood, paper, cardboard, leather,
metals, glass, ceramics. Not suitable for polyamide (PA), acetal resin (POM)
polyethylene (PE), polypropylene (PP), polytetrafluoroethylene 8PTFE), silicons
(Si), Styropor® and not suitable for leather used for clothing.

Properties
· forms a hard but flexible adhesive bond with a thermoplastic character
· resistant from -30°C to approx. +90°C
· resistant against water, oil and alcohol.

Preparation
Personal safety: UHU allplast contains volatile, highly flammable solvents.
Therefore, corresponding safety measures should be taken regarding processing
and storage.
Surface requirements: The surfaces must be clean, dry and free of oil, grease
and dust.

Application
Directions for use:
Depending on the specific requirement, one or both of the parts to be connected
are spread with adhesive and joined together immediately. An initial bond
strength is attained after 5 - 10 minutes. The high bond strength of UHU allplast
on plastics is attained by slightly dissolving the surface of the plastic material.
For this reason, the adhesive should only be applied in small quantities on low
caliper plastics.
Stains/residue: Adhesive residues and stains can be removed with acetone or
thinner for nitrocellulose lacquer.

Technical specifications
Specifications:
Appearance: colourless, clear solution
Consistency: low viscosity
Solid content [%]: 19-22
Solvent: ketones/ ester
Flash point [°C]: -19
Danger class (VbF): A I

Physiological properties
The dried adhesive is indifferent, neutral and physiologically safe.

Pack sizes
tube 30g